Peugeot 306 Instrument Panel Fixed

Hey, I'm happy to tell you about this one! We've had beautiful holidays all along the coast and the beautiful Atlantic Ocean but one night the instrumet panel of the Peugeot 306 went completely off. No fuel gauge, no rev counter and no speed gauge.
Peugeot 306 instrument panel not working
It is kind of funny to drive in these conditions and it was Saturday so I decided to search the fuse box and try to fix it by myself.
The fuse box is under the steering wheel as you can see in this picture
Find Peugeot 306 fuses box

You see that big screw? You only have to turn it one quart to the left to see the fuse box open.
This is the 30 fuse box for the Peugeot 306:
Peugeot 306 fuses box
All I had to do was check all the fuses and replace the faulty one, I had found a fuses application chart that marked the fuse F2 as the faulty one related to the instrument panel. Fuses are indexed with a small white number in the box.
Well I've replaced it but it didn't work! The instrument panel was yet off!
As I had an extra 5A fuse and another 10A fuse, my dear one had the idea to replace one by one the 5A first and there was the fuse number 25 one, I've fiddle a little bit with it, I've unplugged it and then plugged it back again ant it worked!
We could go on with our holydays happily.

Comments

Post a Comment

Your opinion is very appreciated, thank you!

Popular posts from this blog

Repair Dolce Gusto Circolo Leaking Problem

Image
My Dolce Gusto coffee machine started leaking without even plugin in to the socket. Water was leaking at the base, the tank would get completely empty in a few seconds, so I dismounted the back cover to see. Use a Torx tool.  Fisrt start removing the two screws down besides the reservoir connector. Down there you see the join inside the water connector. That small rubber joint was apparently in a good shape but the problem really came from it. I took the small water filter and descaled it by diping it in white vinegar for a few minutes. Then I took a rubber tap joint from my tool box and put it on top of the rubber joint as you see it in the circle. Then I mounted all back again and it works! The joint was just too used, and you can replace it with a tap rubber joint, just find the right size. Descale the coffe machine This is always a good thing to do every two or three months to keep the inside clean. I descaled completely by filling the water tank with a mixture
Read more

Root Nook Simple Touch with updated NookManager

Image
I have just rooted my Nook Simple Touch and it works really well. The screen quality is better than some other android readers which are really expensive on the market. After rooting everything flows and works fine, even browsing with Opera Mini. Upgrade the firmware to 1.2.2 With the old firmware 1.1.0 the wifi network does not work, so to upgrade the firmware you have to side download it to the reader and once it gets in sleep mode it will begin to upgrade itself Go to the page: https://help.barnesandnoble.com/hc/en-us/articles/5379840873371-Having-trouble-connecting-to-your-NOOK-#ManualDL and follow the instructions, then download the file: https://su.barnesandnoble.com/nook/nook2/1.2.2/351e26527e80156183e74be2da2ce89f/nook_1_2_update.zip Upgrade the firmware Register your Nook Simple Touch Root the Nook Simple Touch This update is only for firmware 1.2.2, I was impatient and tried to do it on the old firmware and it does not work well as you cannot install apk files or have Wi
Read more

How to Change the Gear Shift Knob of the Peugeot 306

Image
Well, last week the gear shift knob of my car got teared down in my hand as I was driving as you can see it in the picture. It was so really broken that the official knob from Peugeot would not fit anymore. The good thing about it is that now I can replace it by a nice one. But it was a real pain to figure out how to dismount it, the main thing is to lift up the leather bag around it first, from the bottom and then turn the knob twice to the left and then pull from it till it comes off . As you can see the white base support was broken too, so I had to dismount the whole thing and look for an universal knob to replace it. Well here is the gear shift itself all alone, I had to stick around it a piece of plastic and then tighten it up with a wire (I did this with my pliers to hold it tight), so that the leather bag will not move down later. Here is the new knob, it has a nice fairy on it, well, I know you are smiling :) but it was the only one in the store one that fitted
Read more